Energy Invention Research –Alternate Renewable

Submitted by an LD OnLine user on

PASSWORD>aaTM6X.NyP1HoALTERNATIVE ENERGY FOR GENERATING ELECTRICITY( Natural Thermal Energy of Planet Earth converted to useful Electricity )From :VIKRANT SURI ,810 , Phase - 2 ,Industrial Area , Ram DarbarCHANDIGARH - 160 002INDIA e-mail : [email protected]@indya.com web site : http://www.anandgarh.orgPhone: 91-172-648465 / 668421Dear Sir ,At the very outset let us make our stand very clear-we “do not” have a proposal for any “Perpetual Motion Machine” or “Free Energy Device” . We have extensively gone through web pages on Energy , Renewable Energy , Alternate Energy , New Energy etc.,etc. , and in the process came across web pages on Perpetual Motion Machines and Free Energy . As such most categorically we have nothing to do with Perpetual Motion Machines or Free Energy Devices .These terms have been used in our detailed Project Report and their usage is simply as a terminology to an expression and thus highly qualified - simply to connote a Mechanical Energy output got by a Temperature Difference ( Heat Engine - cold & hot reservoir ) created by the simple Evaporation of water - assumed as a free input for our limited use .Trust this is made amply clear-leaving no scope for mis-understanding . These two terms of Free Energy and Perpetual Motion should never have been used in the first place .Admitted shortcomings of our Research work .The “concept” of our work in itself is “not” new .The concept of Vacuum-Vapour in its combination is “not” new - being known to science for long . The display of Vacuum-Vapour already exists , in many applications , and is elementary science .The Energy Balance ( Latent Heat of Evaporation of Water - small Temperature difference - Heat Engine - Laws of Thermodynamics - Result : Poor Efficiency of the models ) is and will always remain on the weaker side .Keeping this in mind - our current bigger Models weigh ( inclusive of internal Liquid contents- DiEthyl Ether - and the metallic holder/clamp ) upto 6.5 kgs ( Six and half Kilograms ) and have a height of 7 Feet(Seven Feet) and these are fully and efficiently functional on the Evaporation of Water - having an extractable Energy output on the Axle of movement .We feel there is cause enough for further development of this concept : with better Workshop , Tool-Room and Laboratory facilities we ourselves can improve the functional capability and Gross Output - not necessarily the efficiency - of this invention by at least a factor of ten ( 10 ) , from our current levels . The Energy extraction will take place internally by breaking the contact point of the Central Pipe internally with the surface of the Liquid in the Lower ( Hot ) Container , by Energy partially taken from the weight of the Liquid condensed or Vacuum pulled in the Collector . So we will essentially have stationary models . The Internal Liquid used will have a low Latent Heat of Vapourisation and Condensation figure as also preferably a Specific Density greater than one . Such Liquids hold the key to further developments and will have to be engineered if not already available. Technically and scientifically there is no barrier to development of such Liquids – where and who has to be arranged .At this stage a practical utility can easily come about for generating initially a small quantity of Energy / Electricity . Also keep in mind that in todays Research oriented civilisation and society - no Energy producing invention or device , as long as it is based on sound scientific principles , constructable economically and can recover ( as electricity generated ) many times over its cost of construction - should or will be ignored for long .For greater details please download from our web site http://www.anandgarh.org Link – Energy Research ) Two Chapters ( about Nine Thousand words of written material ), Four Diagrams of the Models as prepared (these are original extracts from our Detailed Project Report) and some Press articles as appearing in national dailies subsequent to our Press Conference held at Chandigarh , INDIA , on 17th May 2000 , to declare and make public the worth of our invention .At our current level of work we have prepared Thirty efficient workable Models to prove the utility of the concept as also written a detailed Project Report with Fifty Seven Diagrams , explaining minutely the Models functioning and reasoning for its future potential use .For any further details or queries ( after going through part of our Project Report placed on web site http://www.anandgarh.org - link Energy Research ) please contact me without hesitation and your e-mail shall be replied to within 24 (Twenty Four) Hours .Should you choose to either investigate this invention , construct your own models , ( limited workshop and toolroom facilities are required - and the models are constructable within two weeks time ) or set up a greater research leading to commercial application - please feel free to contact us for our help . Our involvement will be limited to only what you want of us .Please feel free to put forward any enquiries to me.Vikrant Surihttp://[email protected] [email protected]

Submitted by Anonymous on Wed, 03/14/2001 - 5:00 AM

Permalink

PASSWORD>aaTM6X.NyP1HoEnergy Invention Research –Alternate Renewable – Vikrant SuriALTERNATIVE ENERGY FOR GENERATING ELECTRICITYNovel means of extracting shaft horsepower from ambient heat.From :VIKRANT SURI ,810 , Phase - 2 ,Industrial Area , Ram DarbarCHANDIGARH - 160 002INDIA e-mail : [email protected]@indya.comweb site :-http://www.geocities.com/vikrantsuri3/index.html http://www.geocities.com/vikrantsuri4/index.html http://www.geocities.com/vikrantsuri6/index.htmlPhone: 91-172-648465 / 668421Dear Sir ,The device we have developed uses the low boiling point of certain liquids as a means of transferring their mass to another part of the device. By this means we are able to recover the change in potential energy that the fluid has gained due to the change in location. This energy is recovered by rotating the device about an axle through which useful work can be extracted with each movement. The device requires an on going supply of input heat energy to cause the phase change and removal of thermal energy at the cold end and thus does not qualify as a “Perpetual Motion” device or as a “Free Energy” device as these terms are used on the web. The fact that the temperature differentials required to make the device work can be designed to make them low enables it to use sources of energy which are freely available in the environment. A thermal hot pool or solar concentrators will provide the energy to keep the devicein motion and are free of charge to the owner of the device. If coupled to the exhaust flue of a space heater, the device woul duse this thrown away or free heat to operate. The device can be said to produce free energy as the shaft horsepower which th edevice produces comes at no cost to the owner other than the construction and maintenance costs of the machine once it is inplace.To be perfectly clear:THIS DEVICE IS NOT A “PERPETUAL MOTION MACHINE” NOR IS IT A”FREE ENERGY DEVICE” in the context that these terms are used on the many web pages that our research has unearthed. We haveconducted extensive searches on Energy, Renewable Energy etc.and have run across these terms many times. Our device uses sound scientific principles and working models are available for inspection at our offices in India to any who would care to visit. This is in sharp contrast to many of the web pages we have visited.The underlying concept of our work is not new or strange.The knowledge that certain fluids boil at temperatures close to room temperature has been known for years. Amusement devices such as the “Bobbing Bird” are easily found. The base principle of our device is easily illustrated with this toy. The movement of the working fluid causes the center of gravity of the bird to change and it dips the beak into a glass of water and the fluid is condensed. The condensed liquid then flows back into the lower chamber which again changes the center of gravity and causes itto return to the vertical. Our invention takes this principle and scales it up many times and uses construction materials that are more durable. We also change the arrangement of the chambers to allow for efficient heating of the hot end and easy cooling of the cold end. In short, our device bears littler resemblance to the toy, yet it uses and exploits the same proven scientific principle.Another device which uses the boiling and condensing of a volatile liquid is the Minto’s Wheel (Popular Science, March1976). It differs in construction, complexity from our device.We feel that our device has distinct advantages over the Minto’sWheel in the areas of size, simplicity and the need to be perfectly balanced - all of which are critical factors for a device which is to be locally built and maintained in adeveloping area.We feel that any reasonably handy person with access to the appropriate shop facilities could build a working model of our device in about two weeks of spare time.We encourage interested individuals to do so. To help you, we held a press conference on May 17th, 2000 to declare to the world the worth of and make public our invention. A web site with complete details is available athttp://www.geocities.com/vikrantsuri3/index.html http://www.geocities.com/vikrantsuri4/index.html http://www.geocities.com/vikrantsuri6/index.htmlThese references should be enough to give interested parties the basic understanding necessary to begin construction of a working prototype. If you have any ideas or questions after reading these pages, please feel free to contact me. I will endeavor to reply to all emails within 24 hours. We are interested in seeing this device become a commercial reality and will limit our involvement to whatever level you desire of us that is within our capability. With greater engineering skill and better facilities for manufacturing we feel that the gross shaft outputs that we have measured can be increased by a factor of ten.We feel that this is justification for further development of the device and investigation into tasks to which the device may be placed. We envision the device pumping water from wells, generating electricity, turning mill stones and any other stationary application where the shaft horsepower that can be generated can be used. All of these tasks can be accomplished by the device without the need for fossil fuels. If operation is desired during a time that the free heat of the sun is not available , renewable sources of heat such as burning wood could be used to supply the heat input needs of the device.We have constructed thirty working models. Our largest stands 2.13 meters high and masses about 6.5 Kg. Our goal is to provethe utility that can be gained from it. In the society of today we need every means of harnessing the energy that is produced by the planet or that falls from the sun in an environmentally sensitive way. The device operates on a small enough temperature differential and is sealed so that once put into operation, it will function for years with minimal maintenance.We envision the device pumping water from wells in competition with more expensive Solar Panels and pumps and being cost effective versus internal combustion pumps and electrical generators. The device uses a level of technology so that it can be locally manufactured and maintained and thus is ideal for developing areas in India and the world. Due to the low cost of construction and the long service life that this device promises, we anticipate that the world will not be able to ignore it for long. .Please feel free to put forward any enquiries to me.Vikrant Surihttp://www.geocities.com/vikrantsuri3/index.html http://www.geocities.com/vikrantsuri4/index.html http://www.geocities.com/vikrantsuri6/[email protected] [email protected]

Back to Top